Riello 40 G7, Инструкции по установке, использованию и обслуживанию

Страница: 47 / 64

20032189 14 GB
Installation
5.6 Working position
5.7 Securing the burner to the boiler

Put on the flange 1) the screw 2) and two nuts 3).

If necessary, widen the holes of the insulating
gasket 5)(see Fig. 8).

Fix the flange 1) to the boiler door 4) using screws 2) and (if
necessary) the nuts 3) interposing the insulating gasket 5).

Verify that the installed burner is lightly leaned towards the
button (Fig. 9).
WARNING
The burner is designed to operate only in the po-
sitions
1 , 2 and 4 (Fig. 6).
Installation 1 is preferable, as it is the only one that
allows performing maintenance operations as de-
scribed in this manual.
Installation
4 allows working operations but not
maintenance with hooking to the boiler.
DANGER
Any other position could compromise the correct
operation of the appliance.
The installations
3 and 5 are forbidden for safety
reasons.
Fig. 6
S10022
2 3 4 5 1
Provide an adequate lifting system of the burner.
WARNING
The seal between burner and boiler must be
airtight.
WARNING
Verify that the installed burner slopes slightly
downwards (Fig. 10).
1
E9022
3
2
Fig. 7
D5012
5
Fig. 8
D8058
1
2
2
5
3
4
Fig. 9
D5572
Fig. 10