Riedel Performer C3 Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 80

background image

PERFORMER Digital Partyline, User Manual, Version 2.30

6.2.1

Channel Knob (2 Functions)

Volume Channel A/B
The channel volume knob adjusts the channel volume of the CW-2 (0-100%). Turn the knob
clockwise to increase the volume of the channel and counterclockwise to decrease the
volume of the channel. The channel is MUTED when the encoder is turned counterclockwise
as far as it will go.

TALK Channel A/B (Auto / Momentary)
Pressing the left knob activates the TALK for channel A. This is indicated by the green LED.
Pressing the right knob activates the TALK for channel B. An active TALK key enables talking
to the corresponding digital partyline channel. The TALK key can be set to auto or momentary
mode using DIP switch 1 for channel A and DIP switch 2 for channel B on the bottom of the
C3.

6.2.2

CALL Key

When TALK A or TALK B is active pressing the CALL key sends a CALL signal to the
corresponding channel of the partyline. On all connected devices the selected CALL signal will
light up e.g. CW-2 - TALK LED (green) alternates blinking with the CALL LED (orange).

6.2.3

GPI Key (Formerly SCALL)

If TALK A or TALK B is active pressing the GPI key (formerly SCALL key) sends a command to
the devices to close the GPI-out on the corresponding channel. The GPI signal can also be
understood by an Artist/Performer system, if connected.

Note: The function carried out by the GPI key is not displayed on the CW-2!

6.2.4

Side Tone Key (momentary)

Press and hold the Side Tone key to adjust the side tone with the volume knob of channel A.
The channel volume knob now adjusts the side tone volume of the CW-2 (0-100%). Turn the
knob clockwise to increase and counterclockwise to decrease the volume of the side tone.
The side tone is turned OFF when the encoder is turned counterclockwise as far as it will go.
This function is momentary and it is indicted by a fast flashing CALL LED.

The side tone key functions in parallel to the side tone DIP switch 8 (latching).

Note: The side tone is designed for the headset mode. Having a side tone in the speaker
mode might lead to feedback!

Activating the side tone function also ends active talks!

Page

38

USO

RESTRITO

«
...
36
37
38
39
40
...
»

Содержание Performer C3

















































































Отзывы:

Нет отзывов

Похожие инструкции для Performer C3

Бренд: Bticino Страницы: 84

ProMedia Ultra 2.0

Бренд: Klipsch Страницы: 7

Бренд: Medion Страницы: 308

Бренд: Innovative Technology Страницы: 14

Бренд: TAD Страницы: 2

Бренд: auna multimedia Страницы: 17

Бренд: RAM Страницы: 22

Бренд: EAW Страницы: 2

Бренд: Yabang Страницы: 6

Бренд: XtendLan Страницы: 24

Бренд: JUNGLE HOBBIES Страницы: 37

Бренд: Redback Страницы: 2

Бренд: AccessPRO Страницы: 8

Бренд: Monacor Страницы: 2

Бренд: TCS Страницы: 12

Бренд: Cary Audio Design Страницы: 41

Kristallo Series

Бренд: Videx Страницы: 24

Бренд: RTS Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды