Riedel Performer C3, Руководство пользователя

Страница: 69 / 80

PERFORMER Digital Partyline, User Manual, Version 2.30
For two-channel mode (both digital partyline channels should correspond with the matrix),
make a right click on the ‘C3- Beltpack’ now visible in the left ‘Network’ tab window and open
the ‘Properties’ menu. Here check the ‘Enable 2nd audio channel’. This automatically blocks
the next even-numbered port in the ‘Port List’ on the right side of the main window. The port
is blocked and you will see the statement ‘the panel above uses this channel too’. The
connection between the matrix and, for example, line 1 channel B of the digital partyline is
also now established.
After all partylines are installed to the matrix, reset the node. Click on the menu ‘Extras’ and
select ‘Reset All Nodes’.
Note: When you reset the node make sure the intercom is not needed! The reset will take
approximately 20 seconds.
9.2.3 Call to Conference
Open the tab ‘ Confs’ to program the partyline.
Simply create a conference with the partyline channels and the panels as members. ( Æ
Director Manual - How to create a conference)
Page 69
USO
RESTRITO