RIDGID WTS2000L, Руководство оператора

Страница: 24 / 44

4
22.5°/45° Bevel-Cut Indicator
Lights that indicate that the saw is positioned for a .5° or
45° bevel cut.
Anti-Splash Guard
Minimizes the over-spray and mist when cutting a work
piece.
Wrench Storage Clips
Conveniently holds the nut wrench and hex wrench when
they are not in use.
Extension Water Tray
Catches over-spray from large tile and redirects water into
the water tray.
Support Arm
Supports the motor unit on the frame.
Motor Unit
Powers the tile saw.
Bevel-Cut Adjustment Knob
To adjust the angle of the saw blade for a bevel cut, please
read “Bevel Cut Adjustment” on page 6.
Handle
For raising or lowering the saw unit.
Depth-Adjustment Knob
Please read “Depth Adjustment” on page 5.
Depth-Stop-Adjustment Knob
Please read “Depth Stop Adjustment” on page 5.
Work-Table Fence
Includes scale rules.
Wheel Locks
Used to stop the stand from rolling.
Stand Anchors
May be used to fix the stand to the floor.
Laser Adjustment Knob
Align the laser beam with the cutting line by adjusting one or
both adjustment knobs on the sides of the blade guide.
Please see Laser Beam Calibration on page 8.
Blade-Guard Release Knob
Please see Installing the Saw Blade on page 19.
WARNING!
The use of any accessory or attachment or the perfor-
mance of any operation with this tool other than those
recommend in this instruction manual may present a
risk of personal injury.
Technical Specifications
Power Supply 10V~, 60Hz
Motor Capacity 15A
No-Load Speed 400 RPM
Diamond Blade Size 10" x 5/64" x 5/8"
Maximum Tile Depth of Cut at 0° 3-3/4"
Tilting Range 0°, .5°, 45°
Maximum Rip Cut 4" Square
Maximum Diagonal Cut 18" Square Tile
GETTING TO KNOW YOUR WET TILE/STONE SAW