RIDGID Wet-Dry VAC, Сборка

Страница: 6 / 20

Wet/Dry Vac Assembly
Vacuum
Inlet
Detachable
Blower
Handle
Lid Assembly with
Detachable Blower
Drum Latch
Drum Catch
Inlet
Drain Cap
Dust Drum
Assembly
1. Locate the lid assembly and the drum
assembly (assembled earlier).
2. Position the lid assembly with the
detachable blower handle of the unit
located above the vacuum inlet on the
dust drum.
3. To assemble the lid assembly to the
drum assembly, lower the lid assembly
onto the dust drum. Rotate both
latches down until you hear them snap
over the drum latch catches of the
drum.
SP6779-1 Ridgid WD1680 12/21/10 4:07 PM Page 8