RIDGID WD0635, Руководство оператора, Страница: 7 / 28

7
1. Slide extension wands and acces-
sories onto posts of the caster feet for
storage.
2. To remove wands and accessories,
lightly rotate and pull upward.
To Store Your Accessories
Caster Feet
Storage
Extension
Wand (2)
Utility
Nozzle
Operation
WARNING
To reduce the risk of fire or explosion, do not operate this vac in areas with
flammable gases, vapors or explosive dust in the air. Flammable gases or
vapors include but are not limited to; lighter fluid, solvent type cleaners,
oil-base paints, gasoline, alcohol or aerosol sprays. Explosive dusts include
but are not limited to; coal, magnesium, aluminum, grain or gun powder.
Do not vacuum explosive dust, flammable or combustible liquids or hot
ashes. Do not use this vac as a sprayer. To reduce the risk of health hazards
from vapors or dusts, do not vacuum toxic materials.
CAUTION: To reduce risk of
hearing damage, wear ear
protectors when using the vac for
extended hours or when using it in
a noisy area.
WARNING: The operation of any
utility vac can result in foreign
objects being blown into the eyes,
which can result in severe eye
damage. Always wear safety
eyewear complying with ANSI Z87.1
(or in Canada, CSA Z94.3) before
starting operation. Safety Eyewear
are available at many local retail
stores.
To reduce the risk of electric shock, this
appliance has a polarized plug (one
blade is wider than the other). This plug
will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician to install the
proper outlet. Do not change the plug in
any way.
Utility Nozzle -
General purpose nozzle for
most vacuuming applications.
Extension Wands -
These wands can be
connected together and provides
additional length for more reach.
Hose -
Provides transfer of vacuum or
blowing capability to work site. Provides
the means of attaching extension wands
and nozzles.
= OFF = ON
Familiarize yourself with the accessories
included with the vac. Each accessory may
be used in various ways for vacuuming
and blowing debris. Here is a list of the
accessories and their uses.
After you plug the power cord into the
outlet, turn the unit on by pushing the
switch from position "O" to position "l". The
symbols used on the switch actuator are
international "On & Off" symbols. "O" is the
symbol for "OFF" and "l" is the symbol for
"ON".
!
!
!
WARNING: To reduce the risk of
fire or electric shock, do not run vac
unattended.
!
SP6662 ES.qxd 3/16/07 9:08 AM Page 7