RIDGID RE 12-M, Руководство пользователя

Страница: 6 / 63

Figure 2 – Tool Serial Number
Standard Equipment
The RIDGID ® Model RE 130-M or RE 12-M Manual
Hydraulic Crimp Tool comes with the following:
• Operator’s Manual
• Die Slot Marking Decals (imperial or metric sizes)
• Crimp Head Stand
Selection of appropriate materials and joining
methods is the responsibility of the system designer
and/or installer. Before any installation is attempted, care-
ful evaluation of the specific requirements should be
completed. Consult connector manufacturer for selec-
tion information.
Tool Inspection
WARNING
Daily before use, inspect your crimp tool and correct
any problems to reduce the risk of serious injury
from crushing injuries and other causes, and to
prevent tool damage.
1. Clean any oil, grease or dirt from the tool, including
the handles. This aids inspection and helps prevent
the tool from slipping from your grip.
2. Inspect the crimp tool for the following:
• Proper assembly, maintenance and complete-
ness.
• Any broken, worn, missing, misaligned or binding
parts or other damage.
• Hydraulic leaks. Oil in the carrying case can indi-
cate a hydraulic leak.
• Presence and readability of warning label and
markings (Figure 1).
The carrying case can accommodate 15 pairs of dies, the
instruction manual and the crimp head stand in addition to
the tool.
The RIDGID ® RE 130-M/RE 12-M Manual Hydraulic
Crimp Tools are intended to be used with commercially
available round dies, with appropriate ratings, for crimping
electrical connectors onto wire.
See the supplied RIDGID Crimp Die/Electrical Connector
Compatibility Chart or go to www.RIDGID.com/CrimpDies
Figure 1 – RE 130-M/RE 12-M Manual Hydraulic Crimp
Tool
Specifications
RE 12-M RE 130-M
Nominal
Piston Force.....12 ton
130kN
(107kN, (29,225 lbf)
24,000 lbf)
Dies..................Round, 12 ton Round, 130 kN
Max. Cable
Capacity...........750 MCM
400 mm
2
Copper Copper Cable,
Building Wire, 240 mm
2
750 MCM Aluminum
Aluminum Cable
Building Wire
Piston Travel....1.65" 1.65"
(42mm) (42mm)
Operating
Temperature.....-4°F to 104°F
-4°F to 104°F
(-20°C to 40°C) (-20°C to 40°C)
Dimensions.......21.9" x 8.2" x 3.2" 21.9" x 8.2" x 3.2"
557 x 208 x 82mm 557 x 208 x 82mm
Weight ..............11.68 lb (5.3 kg) 11.68 lb (5.3 kg)
The tool serial number is located on the name plate as
shown in
Figure 2. The last 4 digits indicate the month and
year of manufacture (06 = month, 14 = year).
4
RE 130-M/RE 12-M Manual Hydraulic Crimp Tool
Handle
Movable Die
Holder
Release
Lever
Warning Label
Stationary Die
Holder
Die
Release
Buttons
Movable
Handle
Crimp Head
NOTICE
Serial Plate
Model Number