RIDGID R7110, Руководство оператора

Страница: 14 / 16

14
ACCESSORIES
Look for these accessories at The Home Depot:

High Speed Bits (For wood or metal) .................................................................................................1/2 in. (13 mm) Max.
 Masonry Bits ......................................................................................................................................1/2 in. (13 mm) Max.

Wood Boring Bits .........................................................................................................................1-1/4 in. (31.8 mm) Max.
 Hole Saws ...................................................................................................................................2-1/2 in. (63.5 mm) Max.

Drill Stand
 Doweling Jig
WARNING:
Current attachments and accessories available for use with this tool are listed above. Do not use any attachments
or accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not
recommended can result in serious personal injury.
MAINTENANCE
TO RETIGHTEN A LOOSE CHUCK
The chuck may become loose on the spindle and develop a
wobble when using the drill. Periodically check chuck screw
for tightness. A loose screw may cause the chuck jaws to
bind and prevent them from closing. To tighten:

Unplug the drill.

Open the chuck jaws.
 Insert a hex key into the chuck and tighten chuck jaws
securely. Tap the hex key sharply with a mallet in a
clockwise direction. This will tighten the chuck on the
spindle.

Open the chuck jaws and remove the hex key wrench.
 Tighten the chuck screw.
NOTE: The chuck screw has left-hand threads.