RIDGID R4092, Руководство оператора

Страница: 5 / 116

5 — English

SECURE WORK
firmly against the miter guide or fence.

NEVER stand or have any part of your body in line with
the path of the wheel.

NEVER
attempt to free a stalled wheel without first turning
the saw
OFF
and disconnecting the saw from the power
source.

IF THE POWER SUPPLY CORD IS DAMAGED, it must
be replaced only by the manufacturer or by an authorized
service center to avoid risk.

AVOID AWKWARD OPERATIONS AND HAND
POSITIONS
where a sudden slip could cause your hand
to move into the cutting tool.

MAKE SURE THE WORK AREA HAS AMPLE
LIGHTING
to see the work and that no obstructions will
interfere with safe operation BEFORE performing any
work using the saw.

ALWAYS TURN OFF SAW
before disconnecting it, to
avoid accidental starting when reconnecting to power
supply.

THIS TOOL should have the following markings:
a) To reduce the risk of injury, the user must read and
understand operator’s manual.
b) Wear eye, hearing, and respiratory protection when
operating the tool.
c) Do not remove the wheel guard.
d) Do not stack or store tiles on water trays.
e) Never operate the tool without the wheel guard
securely closed.
f) Turn off tool, wait for the wheel to stop moving, and
disconnect the power to the tool before servicing,
when changing cutting wheels, or cleaning.
g) Never use wheels that have openings, grooves, or
teeth on this tool.
h) Always inspect and replace damaged cutting wheels
before operating the tool.
i) Do not expose to rain or other damp locations.
j) Do not fill water bath above maximum water fill line.

SAVE THESE INSTRUCTIONS. Refer to them frequently
and use to instruct other users. If you loan someone
this tool, loan them these instructions too.
SPECIFIC SAFETY RULES
CALIFORNIA PROPOSITION 65
WARNING:
This product and some dust created by power sanding, sawing, grinding, drilling, and other construction activities
may contain chemicals, including lead, known to the State of California to cause cancer, birth defects, or other
reproductive harm.
Wash hands after handling.
Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products and,
• arsenic and chromium from chemically-treated lumber.
Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce
your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are
specially designed to filter out microscopic particles.