RIDGID R09891, Руководство оператора

Страница: 11 / 36

11 - English
TROUBLESHOOTING
NOTE: MAINTENANCE INFORMATION BEGINS ON PAGE 12 AFTER FRENCH
AND SPANISH LANGUAGE SECTIONS. ILLUSTRATIONS START ON PAGE 13.
These products have a 90-Day Satisfaction Guarantee Policy, as well as
a Three-year Limited Warranty. For Warranty and Policy details,
please go to powertools.ridgid.com or call (toll free) 1-866-539-1710.
PROBLEM POSSIBLE CAUSE SOLUTION
Workpiece contact does not depress
fully - tool does not operate Low nails
Work-contacting element is jammed Remove battery and replenish nails
Remove battery and clear jam
Tool operates properly, but nails do not
drive fully Drive power is too low
Depth of drive isn’t deep enough
Nail is too long for wood hardness Increase power
Adjust depth of drive
Use nail length that is appropriate for
wood
Tool operates properly, but nails are
driven too deep Drive power is too high
Depth of drive is too deep Decrease drive power
Adjust depth of drive
Tool jams frequently Incorrect nails
Damaged nails
Loose magazine
Dirty magazine Verify that nails are the correct size
Replace nails
Tighten screws
Clean magazine
Tool stops and LED flashes rapidly Battery is low or has no charge
Trigger released too early Recharge battery
Remove battery and reinstall.
Tool has charged battery and LED is
slowly flashing or LED does not turn
off after approximately ten seconds of
non-use Tool has malfunctioned Take tool to nearest authorized repair
center