38
Getting to Know Your Table Saw (continued)
11. Micro-Adjust Rip Fence...
allows the operator
to accurately adjust the rip fence using only one hand. To
move the fence push in on the micro-adjust knob and
rotate.
12. Universal Caster System
The caster system is activated by rotating the handle
180° to engage the swivel caster, lifting the one side of
the saw off the floor.
The handle can be operated by hand or foot. Hold the
saw in place while activating the swivel caster handle
(see illustration). Care should be taken when activating
the mechanism with your foot. Too much force beyond
the 180° travel may damage the actuator.
Only operate your saw when feet nearest swivel caster
are on floor. Keep floor area clean. Rubber feet on swivel
caster side of base should be lowered onto a clean floor
to help prevent unexpected tool movement during use.
Before raising and moving unit, remove all work pieces to
reduce weight.
Unit can be moved by pulling or pushing. Pulling the unit
by the side with the swivel caster leading, is the preferred
method when moving tool over a door threshold or crack.
The swivel caster moves easier over obstructions by lift-
ing up on the tool.
13. Storage Hooks
Conveniently holds rip fence and miter gauge when not in
use
Feet on Floor When Sawing
Micro Adjust
Knob
Rip Fence
Miter Gauge
