29
Wet/Dry Vac Assembly
1. Position the Powerhead Assembly on
the Drum/Caddy Assembly, as shown
(assembled earlier).
2. Rotate both Latches down and press
until you hear them snap over the
Flanges on the Drum.
Latch
Drum
Latch
Handles
Drum
Drum
Latch
Insert Hose
Insert the Release Button end of the
Pro-Hose into the Vac Inlet of the Drum.
The Hose should snap into place.
To remove the Pro-Hose from the Vac,
press the Release Button in the Hose
Assembly and pull the Hose out of the
Vac Inlet, as shown.
Release
Button
Press
and Pull
Pro-Hose
Vac Inlet
SP7094 1610RVM S/E_1610RVM-SE.indd 29
2/3/19 7:11 AM
