background image

3

• To reduce the risk of personal injury or

damage to Vac, use only Ridgid
recommended accessories.

• When using as a blower:

   -   Direct air discharge only at work

       area.

   -   Do not direct air at bystanders.
   -   Keep children away when blowing.
   -   Do not use blower for any job except

       blowing dirt and debris.

   -   Do not use as a sprayer.

• To reduce the risk of eye injury, wear

safety eyewear.  The operation of any
utility Vac or blower can result in
foreign objects being blown into the
eyes, which can result in severe eye
damage.

• Turn off Vac before unplugging.
• To reduce the risk of injury from

accidental starting, unplug power cord
before changing or cleaning filter.

• Do not unplug by pulling on cord. To

unplug, grasp the plug, not the cord.

• Do not use with damaged cord, plug or

other parts. If your Vac is not working
as it should, has missing parts, has
been dropped, damaged, left outdoors,
or dropped into water, call customer
service.

• Do not pull or carry by cord, use cord

as handle, close a door on cord, or pull
cord around sharp edges or corners. 
Do not run Vac over cord. Keep cord
away from heated surfaces.

• Do not handle plug, switch, or the Vac

with wet hands.

• Use only extension cords that are rated

for outdoor use. Extension cords in
poor condition or too small in wire size
can pose fire and shock hazards. To
reduce the risk of these hazards, be
sure the cord is in good condition and
that liquid does not contact the
connection.  Do not use an extension
cord with conductors smaller than 16
gauge (AWG) in size.  To reduce power
loss, use a 14 gauge extension cord if
25 to 50 ft. long and
12 gauge for 50 ft. or longer.

• This Vac is double-insulated,

eliminating the need for a separate
grounding system. Use only identical
replacement parts. Read the
instructions for Servicing Double-
Insulated Wet/Dry Vacs.

• Do not put any object into ventilation

openings. Do not vacuum with any
ventilation openings blocked; keep free
of dust, lint, hair or anything that may
reduce air flow.

• Keep hair, loose clothing, fingers, and

all parts of body away from openings
and moving parts.

• To reduce the risk of falls, use extra

care when cleaning on stairs.

• To reduce the risk of back injury or

falls, do not lift a Vac that is heavy with
liquid or debris.  Partially empty by
scooping debris or draining liquid. 

Observe the following warnings that
appear on the motor housing of your Vac:

WARNING: For your own safety,

read and understand owner’s
manual. Do not run unattended.
Do not pick up hot ashes, coals,
toxic, flammable or other hazardous
materials. Do not use around
explosive liquids or vapors.

WARNING: To reduce the risk of

electric shock - do not expose to
rain - store indoors.

DOUBLE INSULATED
GROUNDING NOT REQUIRED.
WHEN SERVICING USE ONLY
IDENTICAL REPLACEMENT PARTS.

!

!

SAVE THIS MANUAL

CAUTION: 

• To reduce the risk of hearing damage,

wear ear protectors when using for
extended time or a noisy area.

• For dusty operations, wear dust mask.

• Static shocks are common when the

relative humidity of the air is low.
Vacuuming fine debris with your Vac can
deposit static charge on the hose or
Vac. To reduce the frequency of static
shocks in your home or when using this
Vac, add moisture to the air with a
humidifier.

!

SP6952 16 Gallon ESF1_SP6952  1/16/15  9:21 AM  Page 3

www.

.com

[email protected]

1.800.561.8187

Содержание 1610RV





















Отзывы: