RIDGE RYDER RR100A, Руководство пользователя

Страница: 9 / 20

RIDGE
ACCESSORIES
PAGE 9
FUNCTION- CTCSS & DCS (continued)
SETTING CTCSS & DCS
CTCSS and DCS work on individual channels, so the radio must first be on the channel the user
wishes to communicate on. Then, to access the CTCSS/DCS Function, press the “(F) BUTTON”
twice, CTC will display on the screen (Note CTCSS and DCS can not be used simultaneously).
To enable CTCSS, press the “UP ARROW“ or “DOWN ARROW” until CTC appears on the screen,
channel selection can be made between 1-38. Once the desired setting is selected, press and hold
the “(F) BUTTON” for 3 seconds to save the setting. The unit will automatically change back to the
default screen with the CTCSS sub channel now on display.
To enable DCS, press the “UP ARROW“ or “DOWN ARROW” until DCS appears on the screen,
channel selection can be made between 00-104 (Note, channels: 100,101, 102, 103 & 104 are
displayed o0,o1,o2,o3 and o4 respectively). Once the desired setting is selected, press and hold
the “(F) BUTTON” for 3 seconds to save the setting. The unit will automatically change back to the
default screen with the DCS sub channel now on display.
To turn off CTCSS and DCS, press the “UP ARROW“ or “DOWN ARROW” until “CTC OF” appears.
Press and hold the “(F) BUTTON” for 3 seconds to save the setting. The unit will automatically
change back to the default screen.
FUNCTION- Duplex Mode (basic)
WHAT IS DUPLEX?
The duplex mode on the radio helps increase the range of the radio using repeater stations. In duplex
mode, the fixed position station forwards the signal it receives from repeater input stations (31-38)/
(71-78) to the corresponding output stations (1-8)/(41-48). Any transmissions sent on non-duplex
channels are sent in simplex mode, or directly between radios without the use of a repeater.
NOTE: Detailed information about duplex mode and use of duplex mode can be found on page 13 of
this instruction manual.
SETTING DUPLEX MODE
Duplex mode can only be selected when the radio is on a duplex channel (1 – 8 or 41-48). The fol-
lowing steps will only enable duplex operation on the selected channel. If you wish to enable duplex
on another channel, you will need to follow the procedure again on the selected channel.
To access duplex mode, press the “(F) BUTTON” three times, DUP will display on the screen. Press
the “UP ARROW” or “DOWN ARROW” and the channel number will change from “0” to “r” (for
channels 1-8), or from “4” to “n” (on channels 41-48). Once the desired setting is selected, press and
hold the “(F) BUTTON” for 3 seconds to save the setting. The unit will automatically change back to
the default screen with your current duplex channel selection. The channel selected between 1-8 will
now be displayed with an “r” (instead of 0) and any channel selected between 41-48 will b displayed
with a “n” (instead of 4)
To turn off duplex mode on the selected channel, press the “(F) BUTTON” three times, and press the
“UP ARROW“ or “DOWN ARROW ” until the channel is displayed again. Once the desired setting is
selected, press and hold the “(F) BUTTON” for 3 seconds to save the setting.