RIDGE
ACCESSORIES
PAGE 7
RADIO OPERATION
POWER ON/OFF
To turn the RR100A ON, turn the
“ROTARY KNOB”
clockwise until there is a click. The LCD display
will light up, indicating the unit is now ON.
To turn the RR100A OFF, turn the
“ROTARY KNOB”
anti-clockwise until there is a click. The LCD
display will black out, indicating the unit is now OFF.
VOLUME CONTROL
To adjust the volume, use the
“ROTARY KNOB”
. Turn the
“ROTARY KNOB”
clockwise to increase
the volume and turn the
“ROTARY KNOB”
anticlockwise to decrease the volume.
CHANNEL SELECTION
Press the
“UP ARROW”
or
“DOWN ARROW“
to scroll through the desired channel. For your
reference a list of the available channels, corresponding frequencies and guidelines for their use and
selection can be found on page 14 -15 of this instruction manual.
NOTE:
Channels 05 and 35 are reserved for emergency use only.
INSTANT CHANNEL RECALL
To switch to the instant recall channel, press the
“(UP) BUTTON”
on the
microphone handpiece.
The unit will instantly switch to the preset channel. To set the INSTANT CHANNEL RECALL simply
press and hold the
“(UP) BUTTON”
on the
microphone handpiece
when on the desired channel.
TRANSMITTING
To transmit, press and hold the
“(PTT) BUTTON”
on the microphone handpiece.
Hold the microphone approximately 5-10cm from your face and speak. To complete transmission,
release the
“(PTT) BUTTON”
. Detailed transmitting operation can be found on page 12 of this
instruction manual.
NOTE:
Always ensure the channel is free before transmitting.
MAIN MENU
To access the main menu, while the radio is powered on, press the
“(F) BUTTON”
To navigate
through each menu option, press the
“(F) BUTTON”
multiple times until the desired feature is
reached.
Menu options include:
1.
SQL
- Squelch Sensitivity Control
2.
CTC
- CTCSS/DCS Tone Settings
3.
DUP
- Duplex Mode
4.
SCN
- Scan Options
5.
BCL
- Busy Channel Lockout
6.
CALL
- Call Tone
7.
RBP
- Roger Beep
8.
BEP
- Button Beep
To exit the menu hold down the
“(F) BUTTON”
for 3 seconds and the default channel screen will
reappear, this will also save any settings you changed. Alternatively, do not press any buttons for 8
seconds and the radio will automatically exit the menu and automatically save any changed settings.
SCANNING
To scan, press the
“(S) BUTTON”
and the unit will scan through all 80 channels. For advanced
scanning functions refer to page 10 of this instruction manual.
Содержание RR100A
