RIDGE
ACCESSORIES
PAGE 11
FUNCTION- Busy Channel Lockout
WHAT IS BUSY CHANNEL LOCKOUT?
The busy channel lockout feature will not allow the radio to transmit if it detects activity on a channel.
This is particularly important in areas where many users are using CTCSS. The disadvantage
of using CTCSS in shared frequencies is that; since users cannot hear transmissions from other
groups, they may assume that the frequency is idle and then transmit on top of another user, thus
accidentally interfering with the other group’s transmissions. Busy channel lockout feature will stop
this from occurring.
SETTING BUSY CHANNEL LOCKOUT
To access the busy channel lockout feature, press the
“(F) BUTTON”
five times, “BCL” will display on
the screen. Press the
“UP ARROW”
or
“DOWN ARROW”
to select an option; “on” or “off”. Once the
desired setting is selected, press and hold the
“(F) BUTTON”
for 3 seconds to save the setting. The
unit will automatically change back to the default screen.
FUNCTION- Call Tone
WHAT IS CALL TONE?
A call tone is a 2 second signal that is sent out from the radio to let other users know you would like
to talk to them. It is an alternative option from just speaking into the MIC to indetify the user.
The RR100A has 5 call tone options.
To use the call tone, press the
“(DN) BUTTON”
on the Handpiece Mic and the tone will play.
NOTE:
Legislation only allows the call tone to be used once per minute, if the call button is pressed
more than once in a minute, an error message will appear on the screen.
SETTING CALL TONE
To access the call tone options, press the
“(F) BUTTON”
six times, CALL will display on the screen.
Press the
“UP ARROW”
or
“DOWN ARROW”
to select an option; “1-5”. Once the desired setting is
selected, press and hold the
“(F) BUTTON”
for 3 seconds to save the setting.
The unit will automatically change back to the default screen.
FUNCTION- Roger Beep
WHAT IS ROGER BEEP?
When the
“(PTT) BUTTON”
is released after transmission, the radio will send a short beep to
indicate the transmission has finished. This is known as a roger beep.
SELECTING ROGER BEEP
To access the roger beep feature, press the
“(F) BUTTON”
seven times, RBP will display on the
screen. Press the
“UP ARROW”
or
“DOWN ARROW”
to select an option; “on” or “off”. Once the
desired setting is selected, press and hold the
“(F) BUTTON”
for 3 seconds to save the setting. The
unit will automatically change back to the default screen.
Содержание RR100A
