Ridder Drive Systems BV HARDERWIJK NEDERLAND Tel.: +31 (0)341 416 8 54
Fax: +31 (0)341 416 611
RB50
/ 0505
16
Ridder tube motors.
The Ridder tube motor is a maintenance free, low noise system for driving roll screen systems
with a winding tube of ø50 mm. The built-in limit switch has a range of up to 38 rotations.
The main roll screen applications are:
- Roof screen with a minimum pitch of 20°
- Side screens
Tube motor technical data.
Tube motor accessories.
- Tube motor guiding unit with guiding profile and mounting bow guiding profile
- Cable thread with mounting set
- SH40 square headed gearbox
- RMC50 tube motor control unit with run time protection
- Tube motor testing switch
Explanation of the names in main groups with their parts.
1. [a b c]
Tube motor 1a. motor 1b. split pin 1c. hexagonal key
2.
Tube motor guiding unit
3.
Guiding profile
4.
Mounting bow guiding profile
5.
Cable thread
6. [a b c d e] Mounting set cable thread 6a. square plate 6b. ty-rap 6c. straight plate
6d.blind rivet 6e. end connector
IP protection
class
KB
nominal run time
Tth
run-time thermal cut-off
BES
limit switch range
L
tube motor length
m
tube motor weight
M couple
output
n
number of revolutions
P supplied
capacity
U mains
voltage
~ phase
I current
p frequency
RB50-3.5\230
voltage
number of revolutions per minute
Nm
RIDDER TUBE MOTORS ARE SPECIALLY DEVELOPED FOR ROLL SCREEN SYSTEMS.
OTHER APPLICATIONS ARE ONLY PERMITTED AFTER RECEIVING SPECIFIC APPROVAL
FROM RIDDER AANDRIJFSYSTEMEN BV.
Fig. 1
Fig. 1
