Ridder HortiMaX-Go, Быстрый старт

Страница: 3 / 10

Quick Start Guide for Moisture Sensor
1 Introduction
The purpose of this Quick Start Guide is to briefly explain what a moisture sensor is and how
it can be set up and used. The sensors function using a Smart Switch in combination with
the Ridder HortiMaX-Go!.
1.1 Introduction to Moisture Sensor
Ridder uses sensors that measure the moisture content, the Electric Conductivity (EC) and
the temperature of the plants' growing medium (or substrate) in order to optimize your
cultivation process. Ridder works with the TEROS-12 (CateC) sensor. You can connect
multiple sensors to the Ridder Moisture Smart Switch.
1.2 Use
The Ridder Moisture Sensor can be connected to the following Ridder process computers:
CX500, MultiMa and HortiMaX-Go!. Only operate the equipment if you are familiar with how
these process computers work.
This Quick Start Guide describes the use of moisture sensors in combination with the
HortiMaX-Go!. The data that the sensor collects is combined with data from other sensors.
This gives you an accurate picture of the current conditions in your greenhouse and allows
you to adjust your climate and irrigation controls accordingly.
1.3 Additional documentation
You can read more about the installation and use of moisture sensors in the following
documents:
−
HortiMaX-Go! Installation Manual
−
HortiMaX-Go! User Manual
−
CX500 Dealer Manual
−
Moisture Smart Switch Insert
−
OEM (Original Equipment Manufacturer) documentation provided.