Ridder HortiJet-Go!, Инструкция по установке и эксплуатации

Страница: 27 / 64

No. Step Section to see for this
9 Using the dosing channels for the first time
Test the dosing channels by irrigating
briefly using the fertigation recipe.
Place the suction hoses in the correct
fertilizer tank/acid tank.
Make sure that the liquid levels in all
dosing channels are the same and
operating at the capacity specified.
"Using the dosing channels
for the first time" on
page 41.
10 Test the HortiJet by irrigating for a short
time. "Testing the HortiJet" on
page 42.
Use the Bijlage: "Checklist for step-by-step installation procedure" on page 62
to check that all installation steps have been completed.
4.3 Connecting water supply (hydronic installation)
The HortiJet-Go! is fitted directly to the branches that connect to the mains supply
pipe for the irrigation water. Some of the irrigation water flows directly through the
HortiJet-Go!, so that the fertilizers can be added.
Figure 4-3: Positions of the inlet and outlet on the HortiJet.
No. Name No. Name
1 Inlet 2 Outlet
HortiJet-Go!
27