Ricoh SR4080, Руководство по обслуживанию на месте

Страница: 49 / 74

M14 Stack Plate – Rear Presses down the rear corner of the edge for stapling.
M15 Stapler Rotation Rotates the stapler 45 degrees for oblique stapling.
M16 Staple Hammer Drives the staple hammer.
M17 Punch
Drives the punch shaft and roller. Punch Unit B531
(option).
M18 Upper Transport
Drives the entrance rollers, the middle and upper
transport rollers, and upper tray exit roller.
M19 Shift Jogger
Drives the shift jogger fences against the sides of the
sheets to align the stack, then reverses to return them to
the home position. Jogger Unit B513 (option).
M20 Shift Jogger Lift
Raises the shift jogger fences after aligning the stack,
then reverses and lowers them when returning to the
home position. Jogger Unit B513 (option).
M21 Jogger Top Fence Moves the top jogger fence.
M22 Jogger Bottom Fence Moves the bottom jogger fence.
BOARDS
PCB Main Controls the finisher and communicates with the copier.
PCB Stapler Controls the stapler unit.
PCB
Punch Passes signals between the punch unit and the finisher
main board. Punch Unit B531 (option).
PCB Jogger Controls the shift/jogger unit B513 (option).
Symbol Name Function
SENSORS
S01
Entrance Detects the copy paper entering the finisher and checks
for misfeeds.
S02 Upper Tray Exit Checks for misfeeds at the upper tray.
S03 Upper Tray Limit
Detects when the paper stack height in the upper tray is
at its upper limit.
S04 Shift Tray Exit Checks for misfeeds at the shift tray exit.
Overview
47