T
echnical
B
ulletin
PAGE: 2/5
Reissued: 10-May-11
Model:
Al-P1
Date:
13-Mar-08
No
.: RG179002i
Version
Modified Points or Symptom Corrected
7. The device might lose network connectivity if SSDP is enabled. Network
connectivity could be temporarily restored after a power cycle.
7.34 IMPORTANT:
When you update to this version of Network Support(ver. 07.34, Program No.
G1795742J), be sure to install the following firmware version (or newer) together as a
set, otherwise the machine will not function correctly.
Upgrade the firmware listed in the table below together as a set, according to the
options that are already installed on the customer's machine.
Firmware: Version:
Program
No.:
Note:
Printer
1.18
G1795746M
forG179
Web Support
1.14
G1795743D
forG179
Symptom corrected:
1. If the MFP/LP has a statically configured IP address and domain, it always sends
a HELO using just its hostname. SMTP servers that require client HELOs to
include the client's FQDN will close the connection. The result of this was that
the MFP/LP was unable to send emails.
2. Unable to retrieve the Windows group name from a Windows 2008 R2 server
during Windows Authentication. Because of this, logged in users will only be
granted the "Available Functions" specified for them in the Addressbook.
3. The device is unable to assign group privileges to a logged in user if that group
has a name consisting of more than 20 bytes. To address this issue, the
supported group name length will be increased to 40 bytes.
4. The printer's Windows Authentication function is unable to use Kerberos when
being authenticated on a Windows 2008 or Windows 2008 R2 server. The printer
will still be successfully authenticated because it is able to fail back to NTLMv2.
5. If the printer's IP address is changed to an IP address of another subnet, users
will not be able to browse the network (using Scan to SMB) until the printer is
rebooted.
Other changes:
-----------------------
SSL-related changes:
Note: The new field will only appear if Web Support firmware version 1.14 or later
and Printer firmware version 1.18 or later has also been applied to the device.
1. When the device creates a certificate request, it is now able to specify which
algorithm (SHA1 or MD5) it wants used to sign the certificate. This has been
implemented by adding a field "Algorithm Signature" to the certificate request
form.
2. Web Image Monitor now shows the certificate's key length in:
-
Configuration > Security > Device Certificate > Details
