manualshive.com logo in svg

Ricoh SP 6430DN, Руководство пользователя

Поделиться
Скачать
Ricoh SP 6430DN Скачать руководство пользователя страница 92

When Printer Is Not Functioning Properly

Problem

Solutions

Paper is not fed from the
selected tray.

When you are using a Windows operating system, the printer
driver settings override those set using the control panel. Set the
input tray you want using the printer driver.
For details, see the printer driver's Help.

Prints do not stack properly.

• Paper is damp. Use paper that has been stored properly. See

page 34 "Paper Precautions".

• If printed sheets come out curled, use the standard tray

extension. See page 8 "Guide to Components".

It takes too long to turn on the
printer.

If the printer is turned off while accessing the hard disk (for
example: during file deletion), the printer will require more time to
power-up the next time it is turned on. To avoid this time delay, do
not turn the printer off while it is in operation.

It takes too long to resume
printing.

• The data is so large or complex that it takes time to process it.

If Data In indicator is flashing, the data is being processed.
Wait until it resumes.

• The printer was in the Energy Saver mode or the Sleep mode.

To recover from these modes, the printer must warm up, and
this takes time until printing starts. For details, see page 18
"Saving Energy".

It takes too long to complete the
print job.

• Photographs and other data-intensive pages take a long time

for the printer to process, so wait when printing such data.
Changing the settings with printer driver may help to speed up
printing. For details, see the printer driver's Help.

• The data is so large or complex that it takes time for the

printer to process it. If Data In indicator is flashing, the data is
being processed. Wait until it resumes.

3. Troubleshooting

90

Содержание SP 6430DN





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды