Ricoh S-P2, Руководство по обслуживанию

Страница: 127 / 218

• In order for the PM alerts to display both SP5930 001 and SP5930 002 must be
set to "Yes".
5930 003
Pcon. Life Alert
This SP switches the near-end and end alerts on/off for the service life of the OPC (not
toner), based on the accumulated operation time of the main motor.
Note: "Pcon" (photoconductor) means OPC drum.
[No], [Yes]
No: Near-end and end alerts will not display.
Yes: Near-end and end alerts will display.
Important:
• The setting of SP5930 003 is ignored unless SP5930 001 is set to "Yes".
• In order for the OPC alerts to display (near-end, end of service life) for the AIO,
both SP5930 001 and SP5930 003 must be set to "Yes".
5990 SP Print Mode
5990 001 All (Data List)
Prints the summary sheet for the item selected.
5990 002 SP (Mode Data Li(st)
5990 004 Logging Data
5990 005 Diagnostic Repor(t)
5990 006 Non-Default
5990 007 NIB Summary
SP7-xxx: Data Log
7001
Operation Time
Displays the total number of engine rotation cycles made so far.
Note:
• One cycle is calculated as 2.4 sec. of drum rotation.
• However, this counter also includes idle rotations.
• This counter is not reset at PM.
Printer Engine Service Mode
125
5