Ricoh Ri 100, Руководство по эксплуатации

Страница: 211 / 260

The Cassette Does Not Operate Correctly
This section explains how to troubleshoot when printing does not start even though the cassette is
loaded, when the cassette cannot be removed or the fabric or a foreign object is stuck.
Checking the Status of the Fabric and the Cassette
If printing does not start with an error message even after the cassette is loaded, check the following:
The fabric is incorrectly loaded
Wrinkles, slacks or floats remain on the printing surface.
Load the fabric while smoothing out the fabric from the center outward so that the printing surface
becomes flat.
See page 72 "Loading Fabrics".
Removal of dust/flattening fibers is not performed or performed insufficiently.
Before printing, straighten out the fabric. Once dust is removed from the printing surface of the fabric,
flatten the fabric and remove wrinkles.
See page 84 "Removing Dust and Flattening Fibers".
The edges of the fabric are protruding from the cassette.
The edges of the fabric are protruding from the cassette. Tuck under the table the parts protruding from
the table of the cassette.
See page 72 "Loading Fabrics".
A non-compatible fabric is loaded.
Remove the loaded fabric and load a usable fabric.
See page 70 "Usable Fabric".
Uneven fabric is loaded.
With uneven fabric, the height of the cassette may not be correctly detected. Adjust the height of the
cassette.
See page 210 "Adjusting the Height of the Cassette".
Wrinkly fabric is loaded.
When printing on wrinkly fabric while [Select Print Quality:] is set to [Vivid] and [Garment Type:] is set to
[T-shirt (White/Pale)] in the printer driver, a height position sensor in the machine may react. If this is the
case, set [Select Print Quality:] to [Fine].
The Cassette Does Not Operate Correctly
209