Ricoh PRO C7200S, Руководство оператора

Страница: 400 / 552

• Press [PDF] under [Send File Type / Name], and then press [OK].
For information about other settings, see each section.
10. Press the [Start] key.
When scanning batches, place subsequent originals after the scan files have been sent.
When writing is complete, a confirmation message appears.
11. Press [Exit].
12. Remove the memory device from the media slot.
Remove the media from the media slot only after data has been written completely. Removing the
media while data is being written will result in corrupted data.
For details about removing an SD card or USB flash memory device into the media slot, see
"Inserting/Removing a Memory Storage Device", Preparation.
• The amount of time required to save files to a USB flash memory device or SD card will vary
according to the device's specifications.
• The documents stored on the memory storage device can be printed from the machine's control
panel. For details, see "Direct Printing from a Memory Storage Device", Basic Operations.
• The documents stored on the memory storage device cannot be sent from the machine's control
panel.
• Depending on the security settings, [Store to Memory Device] may not be displayed. For details,
see "Restricting Media Slot Access", Security Guide.
• You cannot specify where the data is saved. Files are saved in the root directory of the memory
storage device.
• If the memory storage device is partitioned, files are saved on the first partition.
• You cannot configure file information such as [User Name], [File Name], and [Password].
• The amount of free space on the memory device is displayed. Note that if the amount of free space
exceeds 10 GB, "9999.99 MB" will be displayed.
• To cancel writing, press the [Stop] key. If files are being written when writing is cancelled, any
partially written files are deleted. Only complete files are stored on the memory storage device.
9. Scan
398