Ricoh Plockmatic SquareBack Trimmer, Руководство оператора

Страница: 20 / 44

CIP Training
Plockmatic SquareBack Trimmer
Manual Feed Mode
Manual Feed Menu
Select the Manual Feed option by
tapping on the highlighted button on
the top ribbon.
Here the operator has to choose the
size of the booklet fed and the type
of finishing desired on the booklet be-
fore starting the production process.
Booklet Size
Booklet Size
This menu allows the user to choose
the finished booklet size: the user can
either select one of the standard sizes or
input a custom size.
Toggle the Thin / Thick Booklet option
depending on the size: choose
“Thick Booklet” when the booklet is
thicker than 1.3 mm or 0.051 inches
(approximately 6 sheets 80 g/m2),
choose “Thin Booklet” when the
booklet is thinner than 1.3 mm.
NOTE:
Selecting [Custom Size] only, will recall
the last custom size inputted. Selecting
[Custom Size] and then [Edit] will open a
new screen that allows for inputting of
custom values. If the values chosen are
out of the paper bounds, the
lengths will automatically be adjusted
to the limit values.
Push the green check mark to confirm the changes or the red cross to discard them and to go
back to the main menu. Pushing the blue play button will bring the user to the next setting:
“Face Trim”.