Ricoh PJ WUL6281 Скачать руководство пользователя страница 9

Страница: 9 / 95

English

Usage Notice

the power cord and consult your dealer or service

representative. Use of the power cord could result in

ﬁ re or electric shock.

■

Warning- Do not use the connection cable if it is deformed,

cracked, or damaged. Doing so could result in

ﬁ re or electric shock. If the connection cable is

deformed, cracked, or damaged, contact your service

representative to request a replacement cable.

■

Warning- When using an extension cord or power strip, only

connect equipment whose total power consumption

is within the power rating for the extension cord or

power strip. If the power rating is exceeded, it may

cause heat buildup and result in ﬁ re.

■

Warning- Do not place the power cord and connection cable in

front of the lens or exhaust vents when the product is

turned on. Doing so may result in ﬁ re.

■

Warning- Be sure to locate the machine as close as possible to a

wall outlet. This will allow easy disconnection of the

power cord in the event of an emergency.

■

Caution-

Push the power plug all the way into the power outlet.

Do not use a power outlet with a loose connection.

Doing so may result in heat buildup. Plug the power

cord in the correct direction into the base. If they are

not plugged in correctly, it could result in smoke, ﬁ re,

or electric shock.

■

Caution-

If this machine is not going to be used for several days

or longer, disconnect its power cord from the wall

outlet.

■

Caution-

When disconnecting the power cord from the wall

outlet, always pull the plug, not the cord. Pulling the

cord can damage the power cord. Use of damaged

power cords could result in ﬁ re or electric shock.

■

Caution-

Be sure to disconnect the plug from the wall outlet

and clean the prongs and the area around the prongs

at least once a year. Allowing dust to build up on the

plug constitutes a ﬁ re hazard.

■

Caution-

When performing maintenance on the machine, always

disconnect the power cord from the wall outlet.

■

Caution-

Unplug the power cord from the wall outlet before you

move the machine. While moving the machine, take

care that the power cord is not damaged under the

machine. Failing to take these precautions could result

in ﬁ re or electric shock.

Содержание PJ WUL6281
































































































Результаты поиска

Содержание PJ WUL6281

Отзывы:

Похожие инструкции для PJ WUL6281

Бренды по названию

Популярные бренды

Ricoh PJ WUL6281, Руководство пользователя

Результаты поиска

Содержание PJ WUL6281

Отзывы:

Похожие инструкции для PJ WUL6281

Бренды по названию

Популярные бренды