background image

13

About the Laser light source

Explains things that you should follow in regard to the laser light source.

 

WARNING

 

 

Do not look into the lens or vent when the product is on. The bright light may 
damage your eyes. Be especially careful in an environment with children.

CAUTION

 

 

This projector has built-in laser module. Possibly hazardous optical radiation 

emitted from this product. Do not stare into the beam. May be harmful to the 

eyes.

 

CAUTION

 

 

Use of controls or adjustments or performance of procedures other than 

those specified herein may result in hazardous radiation exposure.

 

CAUTION

 

 

Do not block the projection light when it is on. If you do so, the part that is 
blocking the projection light may get quite hot and deform, deteriorate or 
cause a burn or fire. The reflected light may make the lens hot and cause a 
product failure. To temporarily suspend projection, select the mute function. 
To suspend longer, turn off the product.

Moving

This section explains safety precautions about moving the machine.

 

CAUTION

 

 

Unplug the power cord from the wall outlet before you move the machine. 
While moving the machine, take care that the power cord is not damaged 
under the machine. Failing to take these precautions could result in fire or 

electric shock.

Содержание PJ LU8000 Series
















































































Отзывы: