Ricoh PJ LU8000 Series, Руководство пользователя

Страница: 31 / 79

31
Remote Control Battery Installation
1
Remove the battery
compartment cover
as shown in the
illustration.
2
Install new batteries
(AAA/R03). Ensure
that you have the
batteries’ polarity (+/–)
aligned correctly.
3
Replace the cover. Do
not mix different types
of batteries or new and
old batteries.
To ensure safe operation, please observe the following precautions :
■ Use AAA/R03 type battery.
■ Avoid contact with water or liquid.
■ Do not expose the remote control to moisture or heat.
■ Do not drop the remote control.
■ If the battery has leaked in the remote control, carefully wipe the case clean
and install new battery.
■ Risk of an explosion if battery is replaced by an incorrect type.
■ Dispose of used battery according to the instructions.
■ Remove batteries from remote control when not using for extended periods.
■ The remote control may fail to operate if the infrared remote sensor is
exposed to bright sunlight or fluorescent lighting.