69
Image has vertical flickering bar
Use “Frequency” to make an adjustment.
`
Check and reconfigure the display mode of your graphic card to make it
`
compatible with the projector.
Image is out of focus
Make sure the lens cover is removed.
`
Adjust the Focus function for the projector lens.
`
Make sure the projection screen is between the required distance.
`
The image is stretched when displaying 16:9 DVD title
When you play anamorphic DVD or 16:9 DVD, the projector will show the
`
best image when the projector display mode is set to 16:9 in the OSD.
If you play 4:3 format DVD titles, please change the format to 4:3 in the
`
projector OSD.
If the image is still stretched, you will also need to adjust the aspect ratio by
`
referring to the following:
Please setup the display format as 16:9 (wide) aspect ratio type on your
`
DVD player.
Image is too small or too large
Move the projector closer to or further from the screen.
`
Press “Menu” on the control panel. Go to “SCREEN” --> “Aspect”and try the
`
different settings.
Image has slanted sides:
If possible, reposition the projector so that it is centered on the screen and
`
below the bottom of the screen.
Press the "Keystone" button on the remote control, until the sides are
`
vertical.
Image is reversed
Adjust the “SETTING" --> "Projection” to correct it.
`
