28
Powering On the Projector
1. Securely connect the power cord and signal cable. Power on the switch
①
and
the Power LED flashes Blue.
2. Turn on the lamp by pressing the
“ ”
button on the control panel of the projec-
tor or “Power On” button on the remote control
②
. The Power LED will turn blue.
The startup screen will display in approximately 10 seconds. The first time you
use the projector, you will be asked to select the preferred language and power
saving mode.
3. Turn on and connect the source that you want to display on the screen (com-
puter, notebook, video player, etc). The projector will detect the source automati-
cally. If not, push the menu button and go to “OPTIONS”.
Make sure that “Auto Source” has been set to “Off”.
If you connect multiple sources at the same time, press the direct source
`
buttons on the control panel or on the remote control to switch between
inputs.
Powering On/Off the Projector
Serial
Trigger out
(12V)
Computer In
Monitor out
LAN
1
Input
Info.
Auto
Lens
2
Turn on the projector first and then select the signal sources.
