Ricoh pentax KP, Руководство по эксплуатации

Страница: 75 / 148

3
Shoo
ting
73
You can measure the white balance at a selected location.
1
Select o in Step 2 of “Setting the White
Balance” (p.72).
2
Use R to select 1 to 3.
1 to 3 are the locations where you
can store three different manual
white balance settings.
3
Under the light you wish to measure the white
balance of, select a white area as the subject,
and press
0 fully.
The captured image is displayed.
4
Use ABCD to specify
the measuring area.
Press
M
to return the measuring
area to the center.
5
Press E .
The White Balance setting screen reappears.
[The operation could not be completed correctly] appears
when measuring is unsuccessful. Press
E to remeasure
the white balance.
t
Memo
• You can copy the white balance settings of a captured image
and save them as o 1 to o 3 in [Save as Manual WB] of the
playback mode palette. (p.81)
You can specify the white balance with the color temperature.
1
Select p in Step 2 of “Setting the White
Balance” (p.72).
2
Use R to select 1 to 3.
3
Press G .
4
Adjust the color
temperature.
Set the color temperature value
within the range from 2,500K to
10,000K.
Available operations
5
Press E .
The White Balance setting screen reappears.
t Memo
• Select [Mired] in [16 Color Temperature Steps] of the
E
3
menu to set the color temperature in mired units. The color
temperature can be changed in 20 mired units with
Q
, and
100 mired units with R . However, figures are converted to
and displayed in Kelvin.
Adjusting the White Balance Manually
WB± WB±
Manual White Balance Manual White Balance
Cancel Cancel Check Check
Adjust Adjust
OK OK
Cancel Cancel OK OK
Adjusting the White Balance with Color
Temperature
Q
Changes the color temperature in
increments of 100 Kelvin.
R
Changes the color temperature in
increments of 1,000 Kelvin.
ABCD
Fine-tunes the color temperature.
±0 ±0 ±0 ±0
±0 ±0
Cancel Cancel OK OK
Color Temperature Color Temperature