2
G
etting Started
38
Use the battery D-LI109 and battery charger D-BC109
exclusively developed for this camera.
Note: AC plug cord
UL Listed, Type SPT-2 or NISPT-2, 18/2 flexible cord, rated
125 V, 7 A, minimum 6 ft. (1.8 m)
1
Connect the AC plug cord to the battery charger.
2
Plug the AC plug cord into the power outlet.
3
Face the
A
mark on the
battery up, and insert it
into the battery charger.
Insert the battery into the battery
charger at an angle, and then fit
into place.
The indicator lamp lights while
charging and turns off when the
battery is fully charged.
u
Caution
• Do not use the battery charger D-BC109 to charge batteries
other than the battery D-LI109. Charging other batteries may
cause damage or heating.
• Replace the battery with a new one in the following cases:
• If the indicator lamp blinks or does not light after the battery
is inserted correctly
• If the battery starts to run down more quickly even after
being charged (the battery may have reached the end of its
service life)
t
Memo
• The maximum charging time is approximately 240 minutes (it
depends on temperature and remaining battery power).
Charge the battery in a location where the temperature is
between 0°C and 40°C (32°F and 104°F).
Using the Battery and Charger
Charging the Battery
Battery charger
Indicator lamp
AC plug cord
Содержание pentax KP
Страница 4: ...2 Memo ...