3 ACS
Automatic Color Selection
• These counters count jobs, not pages.
• If the job is cancelled during scanning, it is not counted.
• If the job is cancelled while it is waiting to be sent, the job is not counted.
• If the job is cancelled during sending, it may or may not be counted, depending on what stage of
the process had been reached when the job was cancelled.
• Even if several files are combined for sending, the transmission counts as one job.
8161
T:PCFAX TX Jobs
These SPs count the number of PC Fax transmission
jobs. A job is counted from when it is registered for
sending, not when it is sent.
[0 to 9999999/ 0 / 1]
8163
F:PCFAX TX Jobs
• This counts fax jobs started from a PC using a PC fax application, and sending the data out to the
destination from the PC through the copier.
8171
T: Deliv Jobs/WSD
These SPs count the pages scanned by
WS.
[0 to 9999999/ 0 / 1]
8175
S: Deliv Jobs/WSD
8181
T: Scan to Media Jobs
8185
S: Scan to Media Jobs
1 B/W
2 Color
3 ACS
8191
T:Total Scan PGS
These SPs count the pages scanned by
each application that uses the scanner to
scan images.
[0 to 9999999/ 0 / 1]
8192
C:Total Scan PGS
8193
F:Total Scan PGS
8195
S:Total Scan PGS
8196
L:Total Scan PGS
• SP 8191 to 8196 count the number of scanned sides of pages, not the number of physical pages.
• These counters do not count reading user stamp data, or reading color charts to adjust color.
System SP Tables-8
293
4
Содержание OR-C1
