Ricoh MP7060A Series, Руководство пользователя

Страница: 11 / 31

4
MP 7060A Series
2.2 Rear panel
Name Function
Power Connector Connects to the power supply (5- and 12-V
DC) of the host computer.
Be careful to connect with the proper po-
larity. Connecting the wrong way may dam-
age the system (and is not guaranteed).
IDE Interface Connector Connect to the IDE (Integrated Device Elec-
tronics) interface using a 40-pin flat IDE cable.
Do not connect or disconnect the cable
when the power is on, as this could cause
a short circuit and damage the system. Al-
ways turn the power OFF when connect-
ing or disconnecting the cable.
Jumper Connector This jumper determines whether the drive is
configured as a master or slave. Changing the
master-slave configuration takes effect after
power-on reset.
Analog Audio Output Provides output to a sound card
Connector (Analog signal).
Digital Audio Output Provides output to a sound card
Connector (Digital signal).
Power connector Analog Audio Output Connector Jumper Connector
Digital Audio Output Connector IDE Interface Connector