Ricoh M178-21 Скачать руководство пользователя страница 216

Страница: 216 / 252

Timer Settings and Return to Standby Mode

The operator can set the two timers with the Smart Organizing Monitor (Printer Configuration > System
tab > Energy Saver Mode 1 or Mode 2).

• Energy Save Mode 1 (30 sec.) can be only turned off or on. The length of the timer cannot be

adjusted. Default: On 30 sec. The machine requires 10 sec. to return to full operation from Energy
Save Mode 1.

• Energy Save Mode 2 (60 min.) can be turned off and on, and the length of the timer can be

adjusted. Default: On, adjustable in the range 1 to 240 min. The machine requires 20 sec. to return
to full operation from Energy Save Mode 2.

Recommendations

• If the operator prefers that these settings be changed or switched off altogether, please explain that

switching these energy saver features off could increase energy costs and waste energy.

• If the operator changes the settings please advise that setting Energy Save Mode 2 should not be

too long. The longer the machine waits to enter Energy Save Mode 2, the more energy will be
wasted.

• Setting Energy Save Mode 2 to the maximum value (240 min.) should be avoided. At close of

business for the day, the machine will wait 4 hours before entering Energy Saver Mode 2. This is a
waste of energy.

7. Energy Saving

214

Содержание M178-21





























































































































































































































































Результаты поиска

Содержание M178-21

Отзывы:

Похожие инструкции для M178-21

Бренды по названию

Популярные бренды

Ricoh M178-21, Руководство по обслуживанию на месте

Результаты поиска

Содержание M178-21

Отзывы:

Похожие инструкции для M178-21

Бренды по названию

Популярные бренды