Ricoh M178-21, Руководство по обслуживанию на месте

Страница: 171 / 252

Low Humidity Mode
Off (default)/On
Black lines a few millimeters thick may appear in prints when the
machine operates in a low humidity environment. Switching this
feature on may eliminate these lines.
Registration
This is image registration. It determines how the image is
projected onto the drum and then onto the paper.
• Horizontal. [-6 to 6/0/1 mm steps]
• Vertical. [-6 to 6/0/1 mm steps]
Adjust Image Density
Adjusts the overall image density. Three settings (reflected in the
progress bar) are available.
-3 to 3/0/1
Toner End Option
Stop Printing (default)/Continue Printing
• Stop Printing. The machine monitors the level of toner in the
AIO. When toner runs low, the machine issues the toner-
near end alert, and there is enough toner remaining to print
about 100 pages. When the toner runs out, the machine
issues the toner end alert and the machine will stop printing.
• Continue Printing. The machine will continue to print, even
after the AIO runs out of toner. The operators must replace
the AIO when they see the quality of the prints deteriorate.
Note
• When "Stop Printing" is selected the machine monitors the
toner level in the AIO, and you will see the toner end
progress bar on the first screen of the SOM.
• When "Continue Printing" is selected, the machine does not
monitor the toner level, you will see a blank progress bar
and two asterisks displayed at the right side.
Reset Settings Reset All Settings
Utilities
169