Ricoh LD425c Скачать руководство пользователя страница 246

Страница: 246 / 317

Registering Folders

237

Note

❒

To register the name, see Registering Names”.

❒

You can enter up to 64 characters for the user name.

❒

You can enter up to 64 characters for the password.

❒

You can enter a path using up to 128 characters.

❒

To specify a folder, you can either enter the path manually or locate the
folder by browsing the network.

❒

If the connection test fails, check the settings, and then try again.

❒

When

[

Do not Specify

]

is selected, the SMB User Name and SMB Password

that you have specified in Default User Name / Password (Send) of File
Transfer settings applies.

❒

If User Authentication is specified, contact your administrator.

Reference

p.206 “Registering Names”
p.237 “To locate the folder manually”
p.238 “To locate the folder using Browse Network”

To locate the folder manually

Press

[

Change

]

under Path.

Enter the path where the folder is located.

Press

[

]

If the format of the entered path is not correct, a message appears. Press

[

Exit

]

and then enter the path again.

Note

❒

Enter the path using this format: “\\ServerName\Share- Name\PathName”.

❒

You can also enter an IPv4 address.

❒

You can enter a path using up to 128 characters.

Содержание LD425c






























































































































































































































































































































Результаты поиска

Содержание LD425c

Отзывы:

Бренды по названию

Популярные бренды

Ricoh LD425c, Руководство по общим настройкам

Результаты поиска

Содержание LD425c

Отзывы:

Бренды по названию

Популярные бренды