Ricoh LD425c, Руководство по общим настройкам

Страница: 164 / 317

Parameter Settings
155
4
Changing the User Parameters
This section describes how to set parameters.
Important
❒
Access to some User Parameter Settings may require options, or other settings
may need to be made beforehand.
❒
It is recommended that you print and keep a User Parameter list when you
program or change a User Parameter.
❒
Do not change any bit switches other than those shown on the previous pag-
es.
A
Press [ Facsimile Features ] .
B
Press [ Initial Settings ] .
C
Press [ Parameter Setting ] .
D
Select the switch number you want to change.
E
Select the bit number you want to change.
When the bit number is pressed, the current value switches between 1 and 0.
Repeat from step
E
to change another bit number for the same switch.
F
Press [ OK ] .
To cancel these settings, press [ Cancel ] . The display returns to that of step
D
.
G
Repeat step
D
through step
E
to change the switch settings.
H
After all the settings are finished, press [ Exit ] .
I
Press the
{
User Tools/Counter
}
key.