Ricoh LD328c, Справочник принтера

Страница: 58 / 168

Preparing the Machine
52
2
Windows XP, Windows Server 2003
Important
❒
SCSI print must be set to "active" from the control panel. For details, see Net-
work Guide .
❒
Installing this printer driver requires Administrators permission. Log on us-
ing an account that has Administrators permission.
Note
❒
This machine can receive print data from one computer at a time only. If a job
from a computer collides with other data, a message may appear on the com-
puter.
❒
To install another printer driver after setting the "1394_00n" port, click
[ 1394_00 ] as a port during the printer driver installation.
❒
When the printer driver is properly installed, connecting or disconnecting the
optional IEEE 1394 cable causes the printer icon to change.
AAAA
Connect the machine and computer using the IEEE 1394 interface cable.
When the [ Found New Hardware Wizard ] dialog box appears, check that [ This wiz-
ard helps you install software for: (Unknown) ] is displayed.
BBBB
Select the [ Install from a list on specific location (Advanced) ] check box, and then
click [ Next> ] .
CCCC
When the message "Please choose your search and installation option." ap-
pears, select the
[ Search for the best driver in these locations. ]
check box, select
the [ Include this location in the search: ] check box, and then select the [ Include
this location in the search: ] check box.
DDDD
Insert the CD-ROM into the CD-ROM drive.
Note
❒
If Auto Run starts, click [ Cancel ] , and then [ Exit ] .
❒
To disable Auto Run, press the left
{{{{
SHIFT
}}}}
key when inserting the CD-
ROM into the drive and keep it pressed until the computer finishes reading
from the CD-ROM.
JupiterC2GB-Print-F2_FM.book Page 52 Friday, December 17, 2004 1:59 PM