Ricoh LD328c, Справочник принтера

Страница: 126 / 168

Printer Features
120
5
❖ ❖ ❖ ❖
Extend A4 Width
You can extend the printing area
width (when printing on A4 sheet
with PCL).
• Off
• On
Note
❒
Default: Off
❒
When the setting is On, the width
will be 8
1
/
2
inches.
❖ ❖ ❖ ❖
Append CR to LF
When set to On, a carriage return
will follow each line feed: CR=CR,
LF=CR
−
LF, FF=CR
−
FF.
• Off
• On
Note
❒
Default: Off
❖
❖ ❖
❖
Resolution
You can set the print resolution in
dots per inch.
• 300 dpi
• 600 dpi (Fast)
• 600 dpi (Standard)
Note
❒
Default: 600 dpi (Fast)
PS Menu
This menu appears only when the op-
tional PostScript 3 unit is installed.
❖
❖ ❖
❖
Data Format
You can select a data format.
• Binary Data
• TBCP
Limitation
❒
This setting is not effective when
operating the machine with a
parallel, USB, or EtherTalk con-
nection.
❒
When operating the machine
with a parallel or USB connec-
tion, if binary data is sent from
the printer driver, the print job
is canceled.
❒
When operating the machine
with an Ethernet connection,
the print job is canceled under
the following conditions;
• The printer driver data for-
mat is TBCP, and the data
format selected on the dis-
play panel is Binary Data.
• The printer driver data for-
mat is binary, and the data
format selected on the dis-
play panel is TBCP.
Note
❒
Default: Binary Data
❖ ❖ ❖ ❖
Resolution
You can set the print resolution in
dots per inch.
• 600 dpi (Fast)
• 600 dpi (Standard)
• 1200 dpi
Note
❒
Default: 600 dpi (Fast)
JupiterC2GB-Print-F2_FM.book Page 120 Friday, December 17, 2004 1:59 PM