Ricoh LD0105, Руководство по эксплуатации

Страница: 110 / 188

7URXEOHVKRRWLQJ
100
The original images are
printed on the reverse side
of the paper. You may have loaded the
paper incorrectly. Load paper into the LCT another
with the print side up, or into a pa-
per tray with the print side down.
See p.102 “
B
Loading Paper”
Misfeeds occur frequently. The side guides of the pa-
per tray may not be locked. Check the side guides are locked.
See p.122 “Changing the Paper
Size”
The end guide of the paper
tray may not be locked. Check that the end guide is locked.
See p.122 “Changing the Paper
Size”
You may have loaded pa-
per whose size cannot be
detected automatically. When you use paper of a size that
cannot be detected automatically,
set the paper size. See p.95 “Tray Pa-
per Settings”.
The saddle stitching staple
cartridge for the booklet
finisher has been removed. Reset the saddle stitching staple car-
tridge. See p.127 “
d
Adding Sta-
ples”
An error message remains,
even if misfed paper is re-
moved. When a misfeed message
appears, it remains until
you open and close the cov-
er, as required. Clear misfed paper and open and
close the front cover. See p.113 “
x
Clearing Misfeeds”
Cannot duplex print You cannot use the paper
in the multi bypass tray
(Tray 7) for duplex print-
ing. For duplex printing, select Tray 1-3
in copier mode or with the printer
driver.
The setting for the Paper
Type: Tray 1-3 is “1 Side
Copy”. Select “2 Sided Copy” for Paper
Type: Tray 1-3
During saddle stitching,
paper comes out open and
not neatly stacked. Depending on the type of
paper, the paper opens as it
rebounds when it is folded. Select a paper type with low re-
bound.
The user code entry dialog
box is displayed. Users are restricted by user
management. Enter the user code (up to 8-digits),
and then press the
{ { { { } } } }
key.
Machine Status Problem/Cause Action