Ricoh LD0105, Руководство по эксплуатации

Страница: 73 / 188

6HWWLQJV<RX&DQ&KDQJHZLWK8VHU7RROV
63
❖ ❖ ❖ ❖ 3ULQW3ULRULW\
Print priority is given to the mode selected.
5HIHUHQFH
p.32 “Multi-Access”
1RWH
❒
Default: Display mode
❒
When the optional booklet finisher, or Finisher 3000B (100-Sheet Staples) is
installed, you can specify an output tray to which documents are deliv-
ered. For more information about how to specify an output tray for each
function, see the following descriptions:
• p.64 “Output: Copier”
• p.65 “Output: Document Server”
• p.65 “Output: Printer”
❖ ❖ ❖ ❖ )XQFWLRQ5HVHW7LPHU
You can set the length of time the machine waits before changing modes
when using the multi-access function (see p.32 “Multi-Access”). This is useful
if you make many copies and you have to change the settings for each copy.
If you set a large value, you can prevent jobs from other functions interrupt-
ing the copy job.
1RWH
❒
Default: 3 seconds
❒
The Function Reset Timer setting is ignored if “Interleave” is set for “Print
Priority” (see p.63 “Print Priority”).
❒
When you select “Set Time”, enter the time (3–30 seconds in 1 second in-
crements) using the number keys.
❖ ❖ ❖ ❖ ,QWHUOHDYH3ULQW
You can set the timing for functions to switch when
> 3ULQW3ULRULW\ @
has been set
to
> ,QWHUOHDYH @
.
1RWH
❒
Default: 10 sheets
❒
Depending on printing time, set values may change.
❒
The timing for functions can be set from 1 to 20 sheets.
❖
❖ ❖
❖ 6WDWXV,QGLFDWRU
You can specify whether the statue indicator shows the machine status or not.
1RWH
❒
Default: ON