manualshive.com logo in svg

Ricoh Laser MFP, Руководство пользователя, Страница: 2 / 159

Поделиться
Скачать
Ricoh Laser MFP Скачать руководство пользователя страница 2

Contents of this manual are subject to change without prior notice. In no event will the company be liable for direct, indirect, incidental or consequential 
damages as a result of handling or operating the machine.

Copyright © 2007.

• Centronics is a trademark of Centronics Data Computer Corporation.

• PCL and PCL 6 are trademarks of Hewlett-Packard company.

• Microsoft, Windows, Windows 98, Windows Me, Windows 2000, Windows NT 4.0, Windows XP, and Windows 2003 are registered trademarks of 

Microsoft Corporation.

• PostScript 3 is a trademark of Adobe System, Inc.

• UFST® and MicroType™ are registered trademarks of Monotype Imaging Inc.

• TrueType, LaserWriter and Macintosh are trademarks of Apple Computer, Inc.

• All other brand or product names are trademarks of their respective companies or organizations.

Содержание Laser MFP
































































































































































Отзывы:

Нет отзывов