Ricoh GR DIGITAL M Скачать руководство пользователя страница 186

Страница: 186 / 204

184

Other Problems

Symptom

Cause

Remedy

Refer
to

Cannot load the Memory
Card.

The card is facing the wrong way.

Load correctly.

P.25

Even when the camera's
buttons are pressed, it
does not operate.

Batteries are running low.

If using alkaline batteries, replace the
batteries with a new set. If using
rechargeable batteries, recharge or use
the AC Adapter.

P.19
P.25
P.26

Camera malfunction.

Press the Power button to turn the power
off, and then press the Power button to
turn the power on again.

P.29

Remove batteries once and load them
again. Reconnect the AC adapter cable
properly, if using.

P.19
P.25
P.26

The date is wrong.

The correct date/time are not set.

Set the correct date/time.

P.134

The date set has
disappeared.

The batteries were removed.

If the batteries are removed for about
one week, the date setting will be lost.
Make the settings again.

P.134

Auto Power-Off does not
work.

Auto Power-Off is set to OFF.

Set the time for Auto Power-Off.

P.128

The beep does not sound. The camera is set to silent.

Mute is set at [Volume Setting].

P.130

Images do not appear on
the TV.

The video format is set wrong.

Set to correct format.

P.136

The cable is not connected.

Reconnect the cable properly.

P.54

The TV in/out switch is incorrectly set. Check that the TV in/out switch is set

correctly.

Содержание GR DIGITAL M













































































































































































































Результаты поиска

Содержание GR DIGITAL M

Отзывы:

Похожие инструкции для GR DIGITAL M

Бренды по названию

Популярные бренды

Ricoh GR DIGITAL M, Руководство пользователя

Результаты поиска

Содержание GR DIGITAL M

Отзывы:

Похожие инструкции для GR DIGITAL M

Бренды по названию

Популярные бренды