FAX UNIT
21 December, 2001
1-2
1.1.2 FAX OPTION INSTALLATION
!
CAUTION
Before installing this option, do the following:
1. Print out all data in the printer buffer.
2. Turn off the main switch and disconnect the power cord and the
network cable.
1. Remove the rear left cover plate [A] (
!
x 2).
2. Turn on the DIP switch [B] on the MBU board, then install the fax unit [C]
(
!
x 2).
NOTE:
Make sure that the controller unit is installed when inserting the fax
unit. If the controller unit is installed after the fax unit has been
installed, this may cause poor connection between the fax unit and
controller unit.
3. Remove the cover key tops [D] and install key tops [E]/[F] and cover [G].
4. Attach the FCC decal (only for US/Canada) to the rear cover.
G307I501.WMF
G307I104.WMF
[A]
[C]
[B]
[D]
[F]
[G]
[E]
[D]