Ricoh G176, Руководство по обслуживанию

Страница: 106 / 294

Printer Engine Service Mode
G176/G177/G176L 5-4 SM
5.3 PRINTER ENGINE SERVICE MODE
5.3.1 SERVICE MODE TABLE
Notation What it means
[range/ default /step]
Example: [-9 to +9/ +3.0 /0.1 mm step]. The setting can be
adjusted in the range
±
9, value reset to +3.0 after an NVRAM
reset, and the value can be changed in 0.1 mm steps with
each key press.
DFU Denotes “Design or Factory Use”. Do not change this value.
SP1-xxx: Feed
Lead Edge Regist Leading Edge Registration
1001
Adjusts the printing leading edge registration for feeding from the trays and
duplex tray using the trimming area pattern (SP2-902
ｆ
No. 12).]
Push [
#
] or [
%
] to select the settings (plus or minus).
The specification is 4±2 mm
1001 001 Bypass Tray Plain
1001 002 Bypass Tray Thick
1001 003 Main Tray Plain
1001 004 Main Tray Thick
1001 005 Optional Tray
1001 006 Duplex
[-40 to +40/ 0 /1]