Ricoh FW 810, Руководство по обслуживанию

Страница: 119 / 170

037 Original exit detector leading/trailing edge OFF check.
038 Original is too long. (Maximum: 4 meters)
039 Recycle gate does not return to the original position (up
position) when the recycle gate solenoid turns off.
040 Recycle gate does not move to the down position when
the recycle gate solenoid turns on.
099 Runaway detection. (Original feed clutch stays on
longer than 125 seconds.)
6.2 PAPER JAMS
CODE CAUSE OF JAM
001 Initial jam.
002 Paper remains in the machine when the Call Service in-
dicator turns on.
016 Paper from the auto feeder does not reach the 2nd feed
detector within 4 seconds.
017 Registration sensor leading edge OFF check.
018 Registration sensor leading edge ON check.
019 2nd feed detector leading edge ON check.
020 2nd feed detector leading edge OFF check.
021 Original is not set within 10 seconds after paper is set.
022 Paper is pulled out after the registration sensor turns on
but before the registration clutch turns on.
23 Multiple paper feed from the auto feeder.
024 2nd feed detector does not detect the trailing edge of
the paper.
025 2nd feed detector ON check.
26 Registration sensor is not on at the time that the registra-
tion clutch turns on. (Possible sensor failure)
032 Upper exit sensor leading edge ON check.
6 January 1990
4-31