Ricoh FT8680OM Скачать руководство пользователя страница 8

Страница: 8 / 160

The fusing section can be very hot. Be careful when handling it.

CAUTIONS:

While copying, do not turn off the main switch.

While copying, do not open the front doors.

While copying, do not lift the document feeder.

While copying, do not unplug the power cord.

Do not lay anything weighing more than 10 kg, 22 lb on the exposure glass.

Do not place tools or other hard objects on the exposure glass.

Keep corrosive liquids, such as acid, off the machine.

Do not allow paper clips, staples, or other small metallic objects to fall inside
the machine.

General Safety Information

❐

Always turn the copier off when you have finished copying for the day, but
leave it plugged in.

❐

When the copier will not be used for a long period, disconnect the power cord.

❐

If the copier must be transported by vehicle, please contact your service repre-
sentative.

❐

When the main switch is in the Stand-by position, the anticondensation heaters
are on. In case of emergency, unplug the machine’s power cord.

❐

To disconnect the power source, the main plug must be pulled.

tb-eu-1

SAFETY INFORMATION

Содержание FT8680OM

































































































































































Результаты поиска

Содержание FT8680OM

Отзывы:

Бренды по названию

Популярные бренды

Ricoh FT8680OM, Руководство по эксплуатации

Результаты поиска

Содержание FT8680OM

Отзывы:

Бренды по названию

Популярные бренды