Ricoh FT8680OM Скачать руководство пользователя страница 106

Страница: 106 / 160

IF YOUR COPIER DOES NOT OPERATE AS

YOU WANT

Check the following:

Copier’s condition

Action

Nothing happens when the main
switch is turned on.

Check the power cord. Is it properly plugged into the
outlet?

➠

Plug it in firmly.

Paper tray is empty.

Load paper.

☛

See page 101.

Toner cartridge is almost

empty.
Or toner cartridge is empty.

Add toner.

☛

See page 107.

The display instructs you to

add staples.

Add staples.

☛

See page 108.

Doors/covers are open.

Close the indicated doors/covers following the
instructions on the display.

Misfeed occurs.

Remove misfed paper.

☛

See page 109.

The display instructs you to

call your service repre-
sentative.

Call your service representative.

The fusing unit is not set cor-
rectly.
The toner cartridge is not
set correctly.

Set them correctly.

An original has been left on
the exposure glass.

Remove the original from the exposure glass.

Staples do not come out at all.

After loading a new staple cartridge, staples might
not be ejected the first few times you try to use the
stapler.

There are jammed staples in the stapler.

➠

Call your service representative.

A few sheets might not be stapled. To correct this,
try turning over the paper stack in the paper tray, or
large capacity tray. If there is no improvement,
change to copy paper with less curl.

The display is off.

Your machine is in Screen Saver mode.

➠

Stand in front of the machine.

☛

See page 117.

tb-eu-6

IF YOUR COPIER DOES NOT OPERATE AS YOU WANT

Содержание FT8680OM

































































































































































Результаты поиска

Содержание FT8680OM

Отзывы:

Бренды по названию

Популярные бренды

Ricoh FT8680OM, Руководство по эксплуатации

Результаты поиска

Содержание FT8680OM

Отзывы:

Бренды по названию

Популярные бренды